The Zacuto C100 Mark II EVF Recoil Pro V2 is a shoulder rig that is compatible with the Canon C100 Mark II camera. When purchasing this rig, you will receive the C100/C300/C500 Trigger Grip, as well as the Zacuto C100 Mark II Helmet, ideal for attaching additional accessories with the help of the Z-rail and threaded mounts, and the VCT Pro Baseplate - everything you need to head out on a shoot with your camera ready and secure on your shoulder. To ensure that the rig is balanced correctly, Zacuto put this rig together following their Recoil Rig philosophy. This means that the balance point is placed directly over your shoulder. The camera body is behind your shoulder, which relocates focus, monitoring, and camera controls forward. This system makes for a light, shorter, and properly balanced rig. 

The C100 Mark II Helmet is custom-designed to fit your C100 Mark II and provides forward or backward top handle adjustment, double-sided Z-Rail jaws, and spring-loaded locking levers. The Trigger Grip enables mounting the camera's handgrip on an articulating extendable arm. The VCT PRO Baseplate enables balancing your camera on your shoulder or mounting on a tripod, and includes 15mm rods and rod clamps.

VCT Pro Baseplate

The Zacuto VCT Pro Baseplate features a built-in curved shoulder pad, an Arri M6 rosette, quick-release 6.5" rods and lightweight rod ports. The v-wedge tripod connector is compatibe with the VCT14 tripod adapter plates or can be connected to your tripod quick release plate via the 1/4-20" and 3/8-16" screw holes. The Pro baseplate is compatible with al lcameras including Canon EOS C-series, Sony FS4 and FS7, AJA CION, BlackMagic, RED cameras, ARri Alexa and Amira, DSLRs, Mirrorless and more. 

The red sliding top plate offers easy adjust-ability for lens changes, removing your camera, and balancing your rig correctly on your shoulder. This sliding plate combined with a double screw track offers 10” of camera balance sliding range. You can quickly release your camera from the rig by sliding the red plate completely off and using our VCT Pro Dock to quickly transition it to a tripod, slider, etc.

The lightweight, adjustable rod mount is set far back in the plate, offering plenty of accessory-capable area under the camera lens. This allows you to position your camera further back on the plate, keeping the balance point of your rig directly over your shoulder. The sliding track of the rod riser offers 25mm of vertical adjustment. (Alternate Tall Rod Riser offering up to 45mm of vertical adjustment - for RED cameras - is available. Contact sales@zacuto.com for more information.)

The shoulder pad portion of the VCT Universal is set as far forward on the plate as possible, also to maximize your accessory capable rod area and aid with balance. The VCT Universal Baseplate is the core of our Next Generation Recoil rigs, designed for balance and comfort for every camera.

Key Features

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Canon C100/C300/C500 Trigger Grip

The Zacuto Canon C100/C300/C500 Trigger Grip is compatible with the Canon C100, C300 and C500 camera grips. With this, you can attach your Canon camera to camera supports that provide an ARRI-standard rosette. This includes the Zacuto VCT Pro baseplate. You can rotate the entire unit a full 360° just by pressing a lever, without having to worry about screwing or unscrewing any knobs, which makes the set easy-to-use and convenient. Another lever gives you the possibility of adjusting the length of the device.

Key Features:

• C100/C300/C500 Camera Grip Relocator
• ARRI Rosette Mount Compatible
• Quick-Press 360° Rotation
• Length Adjustable

C100 Mark II Helmet

The Zacuto C100 Mark II Helmet is compatible with the Canon C100 Mark II camera body. It attaches to the cop of the camera, which offers a sturdier connection point for the camera's top handle. Additionally, it gives you the ability to slide the handle forward and backward for balancing. When purchasing the Zacuto C100 Mark II Helmet, you will receive the helmet itself, along with a 5" Z-rail and a double-jawed Z-Rail lock. The lock allows for secure attachment of the top handle. 

The helmet attaches via one screw on top and one on the side, replacing the film plane screw on the left side of the camera. The Z-rail screws to the top of the Helmet and, in addition to the 5" rail, adds a 15mm rod port in the rear for mounting an optional Axis Mini or other 15mm rod accessory. For additional accessory mounting, the helmet features 1/4"-20 threaded holes on all sides.

Key Features

• Helmet with 1/4"-20 accessory threads
• 5" Z-rail with 15mm rod port
• Double-sized Z-Rail jaws for secure attachment of C100 Mark II's top handle to the Z-rail
• Enables forward and backward top handle position adjustment for balancing
• Spring-loaded ratcheting levers for rod port and Z-rail jaws