Rhino Camera Gear Essentials Slider Bundle Tripod Camera Base Slider

The Rhino Camera Gear Essentials Slider Bundle Tripod Camera Base Slider comes with a 24" carbon fiber slider, ARC II 4-axis motorized head. The ARC II Rhino Camera Slider Base is advanced in motorized pan and tilting. Rhino Essentials Slider Bundle Tripod Base Rhino Focus for ARC II can be used with 4-axis keyframes motion and rack focus. Also provides a high-speed slider motor for horizontal sliding.

Rhino Camera Gear Slider Carbon (24")

The 24" Slider Carbon from Rhino Camera Gear is an ultra-rigid, modular camera slider that supports loads up to 15 lb. This carbon fiber and stainless steel slider is even more rigid than the previous version and it uses an oversized knob to mount quickly and easily to your tripod, no slider spinning required. Use the Slider Carbon with separately available components like the Flywheel for smooth manual slides, the High Torque Motor for vertical motion, or the Arc II motion control unit. Optional stainless steel rails are available to support heavier loads, as are 42" carbon rails for longer slides.

The Rhino Slider Carbon features all-terrain legs for leveling on almost any surface and a 3/8"-16 carriage screw for mounting your camera or ball head. This 24" slider incorporates a single tripod quick mount in the center. Vertical travel is enhanced by a newly designed end plate with a press-fit pulley mount that eliminates slippage.

Key Features

• 24" lightweight carbon fiber rails
• Easy-to-use tripod quick mount in center
• Increased rigidity from previous version
• Interchangeable with separately available rails
• Supports loads up to 15 lb
• New end plate design for smooth vertical moves
• Use with optional Flywheel, High-Torque Motor, and/or Arc II motion controller
• Camera carriage with 3/8"-16 screw
• Integrated carriage brake
• 3/8"-16 and 1/4"-20 mounting threads
• Folding all-terrain legs

Rhino Camera Gear Arc II 4-Axis Motorized Pan/Tilt Head

Perform smooth, precise, quiet camera moves automatically with this Arc II 4-Axis Motorized Pan/Tilt Head from Rhino Camera Gear. The base Arc II can perform pan and tilt operations, and optional slider and focus options are available separately, making it capable of full 4D operations. It mounts a camera with/or fluid head using its Manfrotto 501-type quick release plate and 1/4"-20 and 3/8"-16 screw options. The head can support a cinema camera rig up to 15 lb in weight, and its motors are ultraquiet. Powerful Arc II features include time-lapse, light-lapse mode that performs night-to-day time-lapse, facial tracking, keyframe presets, and camera power options. The head integrates seamlessly with Rhino sliders so setup with another axis is a breeze. You can control the modes and movement of the Arc II using the integrated joysticks, or you can utilize wireless iOS control with an Arc II control app. To power the Arc II, it features internal 4400mAh lithium-ion batteries that are charged using the included international charger kit. It also features a power-saving mode and automatically shuts down when it's not in use for 15 minutes. It can operate via an optional slider at up to a 90° angle with up to 5 to 15 lb rig weight and a separately available high-torque motor.

Key Features

Up to 4-axis head with pan and tilt built-in; slide and focus are optional

15 lb load capacity

Ultraquiet motor operation

Real-time control of Arc II using iOS via wireless or by using the onboard joysticks

Presets using keyframes for creating repeatable shots

Can be used vertically with an optional high-torque motor

Manfrotto 501-type quick release camera plate with 1/4"-20 and 3/8"-16 mounting screws

One 3/8"-16 mounting thread on the bottom

Powers using built-in lithium-ion batteries and charges with included 2.1mm barrel adapter and international charging kit

Powers down after 15 minutes of idle time to save battery life

Automatic face tracking technology

Time-lapse with night-to-day light-lapse feature

Power your camera using Arc II power with an optional cable

Easy to set up and fully compatible with Rhino Gear tripods and slider

Rhino Camera Gear High Speed Slider Motor

Outfit your camera slider for high-speed shots with this High Speed Slider Motor from Rhino. This high-speed motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 5 lb load at a 20° angle and can move at 5" per second. Both 24 and 42" motor cables are included with the motor.

Rhino Camera Gear Slider EVO Carrying Case (24")

Store and protect your 24" EVO camera slider with the Rhino Slider EVO Carrying Case. To facilitate fast setups in the field, the case fits a completely assembled slider, including an attached Rhino Motion, Rhino Arc, and even a fluid head thanks to an expandable "pop top" design. A soft interior lining helps protect the slider from scratches, while retaining straps keep the slider secured in place.

Key Features

• Protects your 24" Rhino Slider EVO
• Expandable pop-top lets you keep your fluid head attached
• Retaining straps keep your slider in place