Azden WHD-PRO Wireless VHF Lavalier and SMX-10 Shotgun Kit

The Azden WHD-PRO Audio Kit is designed to provide high quality audio for DSLR Cameras and Mini-DV Camcorders. Housed in a protective carrying case, the system includes a high quality VHF wireless microphone (WLX-PRO) and a directional stereo microphone (SMX-10) for most types of audio applications. The wireless lapel microphone transmits audio up to 100 feet away. The wireless receiver attaches to the camera’s shoe and plugs into the external microphone jack. The directional stereo microphone comes with a foam windscreen and shock-mount holder. This microphone reduces side and background sounds and has a switchable LF filter for clear sound.
 
SPECIFICATIONS

WR-Pro Receiver :

• Receiver type: Double superheterodyne
• Sensitivity: 2mV at S/N of 40dB
• Battery: 1-9V Alkaline
• Power consumption: 25mA
• Monitor output: 1V at 30W, Modulation frequency: 1kHz, Deviation: +/-7kHz
• Mic output: 8mV w/10KW load, Modulation frequency: 1kHz, Deviation: +/-7kHz
• Mic output impedance: 300W
• Dimensions: 86(h) x 60(w) x 21.5(d) mm (3.3"x 2.4" x 0.85")
• Weight w/battery: 128g (4.5oz)

WM-Pro Transmitter :

• Modulation system: FM
• Sensitivity: 94dB SPL at +/- 2.5KHz deviation
• Battery: 1-9V
• Power consumption: 30mA
• Dimensions: 86(h) x 60(w) x 21.5(d) mm (3.3" x 2.4" x 0.85")
• Weight: 98g (3.4oz)

SMX-10:

• Type: Stereo Electret Condenser
• Frequency Response: 100-18,000Hz
• Sensitivity: -40dB at1kHz (1V/Pa)
• Output Impedance: 1.5 k ohm at 1kHz
• Signal-to-Noise Ratio: 60dB (1kHz at 1Pa)
• Dynamic Range: 66dB
• Power Supply: 1.5VDC ("AAA" size battery) - not included
• Max. SPL: 100dB
• Battery Current Drain: 0.5mA
• Battery Life: 400 hours with Alkaline battery
• Weight w/o battery: 52g
• Dimensions: 177mm long - 18.2mm diameter
• Output cable: attached with 3.5mm plug
• Supplied Accessories: Camera hot-shoe mic holder, windscreen

 
* Due to constant improvements, specifications are subject to change without notice.

All receivers and transmitters in the “PRO” Series are on the same 2 frequencies (169.445MHz and 170.245MHz) and use the same circuitry, making them interchangeable, and allowing you to add to your system at any time.