ARRI Pro Set for Canon C300 Mk III/C500 Mk II (New Version)

Upgrade your Canon C300 Mk III/C500 Mk II with the ARRI Pro Set for Canon C300 Mk III/C500 Mk II (New Version). Featuring a comfortable shoulder support and versatile accessory mounting options, this set includes right- and left-side brackets, a CCH-4 top handle with a sliding adapter, a top plate, an MVB-1 EVF bracket, a shoulder mount baseplate with VCT-14 support, a BPA-5 Bridge Plate Adapter, and a pair of 13" lightweight, stainless steel 15mm rods. Enhance your filming experience with this comprehensive set.

ARRI Top Plate for Canon C300 Mk III/C500 Mk II

The Top Plate for Canon C300 Mk III/C500 Mk II from ARRI enables you to add accessories like the RMB-3 Rod Bracket, the CCH-4 or CCH-2 Top Handle, the MVB-1 Mini Viewfinder Bracket or another EVF bracket, or other accessories to your C300 Mk III or C500 Mk II camera. Top Plate features include 15mm LWS rod support, focus tape studs on both sides, and 1/4"-20, M4, and anti-twist 3/8"-16 mounting threads.

Compatibility

• Canon C300 Mk III

• Canon C500 Mk II

• ARRI Plate for Canon C300 Mk III/C500 Mk II

The Plate for Canon C300 Mk III/C500 Mk II from ARRI is specifically designed to work with the Canon EOS C300 Mk III and C500 Mk II cameras. This versatile plate offers both VCT-14 style plate support and a padded shoulder mount for handheld use. Adjustments can be made by sliding the plate without needing to detach any rod-mounted accessories. Front and rear holders for 15mm LWS rods enable you to flesh out your camera rig with rod-mounted accessories.

Rosettes on both the right and left sides of the plate provide points for mounting handgrips, and anti-twist pins prevent the plate from skewing when attached to the bottom of your camera.

Compatibility

• C300 Mk III

• C500 Mk II

Features

• VCT-style plate and shoulder mount options

• Enables the addition of 15mm rod-mounted accessories to your C300 Mk III/C500 Mk II

• Rosettes on both right and left sides for attaching handgrips or other accessories

• Shoulder pad slides to adjust without needing to remove accessories

• Anti-twist pins prevent the plate from skewing off-center when attached to the camera

• ARRI BPA-5 Bridge Plate Adapter

The BPA-5 Bridge Plate Adapter from ARRI allows you to quickly transfer your camera from a shoulder plate to a cine-style bridge plate such as the BP-8 or BP-9. The adapter is compatible with the plate for the Sony VENICE (available separately).

ARRI Side Bracket Right for C300 Mk III/C500 Mk II

The Side Bracket Right for C300 Mk III/C500 Mk II from ARRI adds a variety of accessory mounts to the right side of your camera while increasing your Canon rig's stability. This cage-style component sports multiple 1/4"-20 and ARRI anti-twist 3/8"-16 threads plus mounting points for a Canon microphone bracket and optional ARRI RMB-3 19mm Rod Brackets and RA-6 Rosette Adapters. Its dedicated design fits the contours and controls of your Canon C300 Mk III or C500 Mk II camera.

Features

• Right-side, cage-type bracket

• Multiple 1/4"-20 and ARRI anti-twist 3/8"-16 accessory threads

• Designed to fit the contours and controls of your Canon C300 Mk III or C500 Mk II camera

• Mounting interface for Canon mic bracket

• Mounting points for optional RMB-3 rod bracket and RA-6 Rosette Adapters

• Increases stability of the camera rig

ARRI Side Bracket Left for C300 Mk III/C500 Mk II

The Side Bracket Left for C300 Mk III/C500 Mk II from ARRI adds a variety of accessory mounts to the left side of your camera while increasing your Canon rig's stability. This cage-style component sports multiple 1/4"-20 and ARRI anti-twist 3/8"-16 threads plus mounting points for optional ARRI RMB-3 19mm Rod Brackets and RA-6 Rosette Adapters. Its dedicated design fits the contours and controls of your Canon C300 Mk III or C500 Mk II camera.

Features

• Left-side, cage-type bracket

• Multiple 1/4"-20 and ARRI anti-twist 3/8"-16 accessory threads

• Designed to fit the contours and controls of your Canon C300 Mk III or C500 Mk II camera

• Mounting points for optional RMB-3 rod bracket and RA-6 Rosette Adapters

• Increases stability of the camera rig

ARRI Camera Center Handle CCH-4

The Camera Center Handle CCH-4 from ARRI is a sturdy, completely closed camera handle. Compatible with most ARRI top plates for both ARRI and third-party cameras, the CCH-4 features multiple 1/4"-20, M4, and anti-twist 3/8"-16 accessory threads.

The versatile CCH-4 handle offers a choice of three positions for mounting on the ARRI Top Plate for the Sony VENICE. For optimal carrying balance, pair this handle with the separately available Sliding Adapter for the CCH-4.

ARRI's Sliding Adapter for CCH-4 adds the convenience of forward-to-back balancing to your CCH-4 Center Handle-equipped camera rig. Compatible with select ARRI top plates, the adapter can be mounted in several positions on your camera's top plate.

The Sliding Adapter for CCH-4 works with ARRI top plates for Canon C200/C700, Panasonic EVA-1/VariCam, Sony PMW-F5/F55, and Sony PXW-FS7/FS7 II cameras.

Compatibility

• Canon: C200, C700

• Panasonic: EVA-1, VariCam

• Sony: PMW-F5/F55, PXW-FS/FS7 II

ARRI Rod Mounting Bracket (RMB-3)

Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.

Rod Compatibility

• 19mm 15mm (with separately available insert K2.66255.0)

• ARRI 15mm Reduction Insert for 19mm Rod

The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.

ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini

Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.

Compatible Cameras

• ALEXA Mini

• ARRI Bracket for Canon LM-V1

The Bracket for Canon LM-V1 from ARRI provides a quick release for the Canon LM-V1 LCD monitor. This bracket enables you to position the LM-V1 LCD monitor for optimal comfort using the adjustable, separately available MVB-1 mount. A lever enables you to quickly lock or release the bracket when the EVF is not being used.

ARRI 15mm Lightweight Support Rods (Pair, 13")

This pair of 13" ARRI Lightweight Support Rods feature lightweight stainless steel construction and are designed to reduce your rig's weight. Use them with any 15mm-based accessory or bridgeplate.

• Hollow, lightweight stainless steel construction with non-threaded ends

• Compatible with any 15mm-based accessory or bridgeplate