The Modular Windshield kit 3
is designed to work with the Modular Suspension, and forms an integral part of the Modular Windshield Kit. It works with shotgun microphones from 161mm up to 210mm in length, with Small Modular Suspension.
The Windshield is a lightweight, durable basket made from flexible grey plastic netting with a screening material attached. The windshield slides on to the Modular Suspension surrounding the whole microphone, connector and suspension. This system creates a still volume of air around the microphone, which provides excellent wind-noise reduction of up to 25dB, including minimal High-Frequency loss.
A Modular Windshield is comprised of: A Windshield body, two end caps, and in some cases extension pieces. The twist and turn locking end caps provide easy, secure and rattle-free on both ends of the windshield. Both end caps can now be removed, facilitating easier placement of the microphone inside the basket.
The modular nature allows the fitting of extension pieces which extends the length of the windshield so that several microphones can be used by one kit. For example, a Windshield 5 is comprised of a Windshield 4 Body, an Extension 1 and two end caps, if necessary it can be used as a Windshield 4, by removing the extension piece.
To achieve maximum protection of up to 35dB, a Windjammer (fur cover) can be used over the Windshield.
Windshields are available in two types, this page refers to 'Mono' windshields which are designed to hold one microphone, and have a diameter of 100mm. 'Stereo' windshields have a larger diameter of 140mm, which fit stereo suspensions designed to hold two microphones.
Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.
Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.
For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.
shotgun microphones from 161mm up to 210mm in length, with Small Modular Suspension
- Width: 100 mm
- Body Windshield Length: 260mm
- Total Length: 380mm
- Height: 100 mm
- Net Weight: 0.16 (kg)
- Gross Weight: 0.32 (kg)